2008–2009 Audi A3 3.2L 6-Cylinder Gauge Setup
Flock 52mm Gauge
One gauge for OBD-II data and wired sensors. Choose your setup below.
This setup covers the US-market 2008–2009 Audi A3 with the 3.2L 6-Cylinder engine. Use one Flock 52mm Gauge for your selected OBD-II readings and wired-sensor measurements.
Choose the correct powertrain
- Model years
- 2008–2009
- Engine
- 3.2L 6-Cylinder
- Listed transmission choices
- Automatic (S6)
- Listed drive configurations
- 4-Wheel or All-Wheel Drive
An A3 setup can balance a discreet daily-driving cooling view with useful intake information on turbocharged versions.
What to monitor on this engine
Coolant temperature and RPM are practical first readings for this engine. Oil temperature and pressure are useful additions for warm-up and sustained engine load; a wired sensor provides a separate measurement route. An automatic-transmission temperature reading belongs to the automatic gearbox; it should not be labeled as a manual-gearbox reading.
Installation approach
Use a small driver-facing bracket that preserves the center display and air-vent controls. Fit the mount from your normal seating position before fixing it in place.
Connect the OBD-II adapter at the vehicle diagnostic connector and secure its cable along fixed trim. Leave the connector accessible for servicing. Follow the Flock user manual for gauge power, adapter setup and wired-sensor connections.
Custom PID settings
These OBDb definitions fit the current Flock firmware. Enter the request, CAN header, formula and unit shown below in the gauge’s custom-PID settings.
Calculated oil temperature
- Request:
2220A1 - CAN header:
7E0 - Formula:
A-40 - Unit: C
Oil pressure actual current
- Request:
22381E - CAN header:
7E1 - Formula:
(B*256+A)/10 - Unit: milliamps
Automatic transmission fluid temperature, variant 2
- Request:
222104 - CAN header:
7E1 - Formula:
A-40 - Unit: C
Engine specified torque during transmission intervention
- Request:
222110 - CAN header:
7E1 - Formula:
A*256+B - Unit: newtonMeters
Configure your gauge
The gauge displays whole-number OBD readings. For temperature definitions labeled C, use the gauge’s temperature preference to choose Celsius or Fahrenheit.
Sources
Signal definitions are adapted from OBDb contributors under CC BY-SA 4.0. Adaptations include Flock-compatible formulas and unit labels.
Get your Flock Gauge
Choose the Flock 52mm Gauge with the OBD-II option for this setup.