2018–2021 Audi TT RS 2.5L Turbo 5-Cylinder Gauge Setup
Flock 52mm Gauge
One gauge for OBD-II data and wired sensors. Choose your setup below.
This setup covers the US-market 2018–2021 Audi TT RS with the 2.5L Turbo 5-Cylinder engine. Use one Flock 52mm Gauge for your selected OBD-II readings and wired-sensor measurements.
Choose the correct powertrain
- Model years
- 2018–2021
- Engine
- 2.5L Turbo 5-Cylinder
- Listed transmission choices
- Automatic (AM-S7)
- Listed drive configurations
- All-Wheel Drive
A TT RS setup can emphasize the turbo engine’s intake heat together with coolant warm-up.
What to monitor on this engine
Coolant temperature and RPM are practical first readings for this engine. Add intake-air temperature for a view of intake heat under repeated load. If you display pressure, keep absolute manifold pressure distinct from boost relative to atmosphere. An automatic-transmission temperature reading belongs to the automatic gearbox; it should not be labeled as a manual-gearbox reading.
Installation approach
Place the small display close to the factory instruments while retaining clearance for the steering wheel and gear selector. Fit the mount from your normal seating position before fixing it in place.
Connect the OBD-II adapter at the vehicle diagnostic connector and secure its cable along fixed trim. Leave the connector accessible for servicing. Follow the Flock user manual for gauge power, adapter setup and wired-sensor connections.
OBD-II and wired readings
Choose standard OBD-II readings such as coolant temperature, RPM, intake-air temperature and vehicle speed in the gauge menu. Use wired sensors when you want an independent oil-temperature, oil-pressure or boost measurement.
Configure your gauge
The gauge displays whole-number OBD readings. For temperature definitions labeled C, use the gauge’s temperature preference to choose Celsius or Fahrenheit.
Sources
- EPA/DOE 2018 vehicle specification
- EPA/DOE 2019 vehicle specification
- EPA/DOE 2020 vehicle specification
- EPA/DOE 2021 vehicle specification
Get your Flock Gauge
Choose the Flock 52mm Gauge with the OBD-II option for this setup.