2016–2019 Cadillac CTS-V 6.2L Supercharged 8-Cylinder Gauge Setup

Flock 52mm Gauge

Flock 52mm Gauge

One gauge for OBD-II data and wired sensors. Choose your setup below.

View gauge details

Representative Cadillac CTS-V exterior
Representative vehicle photo. Photo: Lucas Klappas · CC BY 2.0. Image unchanged.

This setup covers the US-market 2016–2019 Cadillac CTS-V with the 6.2L Supercharged 8-Cylinder engine. Use one Flock 52mm Gauge for your selected OBD-II readings and wired-sensor measurements.

Choose the correct powertrain

Model years
2016–2019
Engine
6.2L Supercharged 8-Cylinder
Listed transmission choices
Automatic (S8)
Listed drive configurations
Rear-Wheel Drive

A CTS-V setup should distinguish the naturally aspirated and supercharged V8 engines before selecting readings.

What to monitor on this engine

Coolant temperature and RPM are practical first readings for this engine. Add intake-air temperature for a view of intake heat under repeated load. If you display pressure, keep absolute manifold pressure distinct from boost relative to atmosphere. An automatic-transmission temperature reading belongs to the automatic gearbox; it should not be labeled as a manual-gearbox reading.

Installation approach

Use a dedicated driver-facing bracket that leaves the factory information screen and gearbox controls clear. Fit the mount from your normal seating position before fixing it in place.

Connect the OBD-II adapter at the vehicle diagnostic connector and secure its cable along fixed trim. Leave the connector accessible for servicing. Follow the Flock user manual for gauge power, adapter setup and wired-sensor connections.

OBD-II and wired readings

Choose standard OBD-II readings such as coolant temperature, RPM, intake-air temperature and vehicle speed in the gauge menu. Use wired sensors when you want an independent oil-temperature, oil-pressure or boost measurement.

Configure your gauge

The gauge displays whole-number OBD readings. For temperature definitions labeled C, use the gauge’s temperature preference to choose Celsius or Fahrenheit.

Browse all gauge setup guides

Sources

Get your Flock Gauge

Choose the Flock 52mm Gauge with the OBD-II option for this setup.

Shop the Flock Gauge with OBD-II