2016–2018 Chevrolet Camaro 2.0L Turbo I4 LTG Gauge Setup
Flock 52mm Gauge
One gauge for OBD-II data and wired sensors. Choose your setup below.
.jpg){kind=link}
The LTG four-cylinder Camaro needs a turbo-engine setup. Set up the display around the turbo engine’s cooling, lubrication and pressure readings.
Use one Flock 52mm Gauge with the OBD-II setup available on the Flock gauge product page. The readings returned by your vehicle determine which display options you can use.
What to monitor on this engine
Start with coolant temperature and intake-air temperature. For the LTG turbo engine, pressure readings add useful context. Keep absolute manifold pressure, desired boost and measured boost clearly labeled in your display.
Installation approach
The owner’s manual identifies the diagnostic connector under the instrument panel. Check adapter and cable clearance there, then choose a 52mm mount that preserves the Camaro’s already compact forward view.
Start with standard OBD-II readings such as coolant temperature or RPM, then add custom manufacturer-specific PIDs in the gauge settings. You can also connect wired sensors to display additional measurements.
Custom PID settings
The following OBDb custom PID definitions are compatible with the current Flock firmware. Enter the request, CAN header, formula and unit shown below in the gauge’s custom-PID settings.
Transmission fluid temperature, variant 1
- Request:
221940 - CAN header:
7E0 - Formula:
A-40 - Unit: C
Calculated engine oil pressure
- Request:
221C1B - CAN header:
7E0 - Formula:
A*4 - Unit: kPa
Calculated engine oil temperature
- Request:
221154 - CAN header:
7E0 - Formula:
A-40 - Unit: C
Configure your gauge
Use the Flock user manual for setup and custom-PID configuration. The gauge displays whole-number OBD readings.
Choose your Flock gauge setup · Browse gauge setup guides
Research sources
- Vehicle specification or owner document 1
- Vehicle specification or owner document 2
- OBDb Chevrolet-Camaro
Signal definitions are adapted from OBDb contributors under CC BY-SA 4.0. Adaptations include Flock-compatible formulas and unit labels. License.
Get your Flock Gauge
Choose the Flock 52mm Gauge with the OBD-II option for this setup.