2016–2018 Chevrolet Camaro 3.6L V6 LGX Gauge Setup
Flock 52mm Gauge
One gauge for OBD-II data and wired sensors. Choose your setup below.
.jpg){kind=link}
The naturally aspirated LGX V6 has a different monitoring focus from the turbo four-cylinder and LT1 V8. Build the display around readings returned by this engine rather than importing another Camaro trim’s entire list.
Use one Flock 52mm Gauge with the OBD-II setup available on the Flock gauge product page. The readings returned by your vehicle determine which display options you can use.
What to monitor on this engine
Coolant temperature and oil temperature make a useful starting view for the naturally aspirated LGX V6. Add oil pressure for a closer view of engine lubrication and transmission-fluid temperature for an automatic gearbox.
Installation approach
Use the under-instrument-panel diagnostic connector identified in the owner’s manual. Before fixing a mount, check visibility with the seat in your driving position and keep the connection accessible for service.
Start with standard OBD-II readings such as coolant temperature or RPM, then add custom manufacturer-specific PIDs in the gauge settings. You can also connect wired sensors to display additional measurements.
Custom PID settings
The following OBDb custom PID definitions are compatible with the current Flock firmware. Enter the request, CAN header, formula and unit shown below in the gauge’s custom-PID settings.
Transmission fluid temperature, variant 1
- Request:
221940 - CAN header:
7E0 - Formula:
A-40 - Unit: C
Calculated engine oil pressure
- Request:
221C1B - CAN header:
7E0 - Formula:
A*4 - Unit: kPa
Calculated engine oil temperature
- Request:
221154 - CAN header:
7E0 - Formula:
A-40 - Unit: C
Configure your gauge
Use the Flock user manual for setup and custom-PID configuration. The gauge displays whole-number OBD readings.
Choose your Flock gauge setup · Browse gauge setup guides
Research sources
- Vehicle specification or owner document 1
- Vehicle specification or owner document 2
- OBDb Chevrolet-Camaro
Signal definitions are adapted from OBDb contributors under CC BY-SA 4.0. Adaptations include Flock-compatible formulas and unit labels. License.
Get your Flock Gauge
Choose the Flock 52mm Gauge with the OBD-II option for this setup.