2024–2026 Chevrolet Corvette E-Ray 6.2L 8-Cylinder Hybrid Gauge Setup

Flock 52mm Gauge

Flock 52mm Gauge

One gauge for OBD-II data and wired sensors. Choose your setup below.

View gauge details

Representative Chevrolet Corvette E-Ray exterior
Representative vehicle photo. Photo: crudmucosa · CC BY 2.0. Image unchanged.

This setup covers the US-market 2024–2026 Chevrolet Corvette E-Ray with the 6.2L 8-Cylinder Hybrid engine. Use one Flock 52mm Gauge for your selected OBD-II readings and wired-sensor measurements.

Choose the correct powertrain

Model years
2024–2026
Engine
6.2L 8-Cylinder Hybrid
Listed transmission choices
Automatic (S8)
Listed drive configurations
All-Wheel Drive

A Corvette setup should keep warm-up and sustained engine heat visible during a spirited drive. Select the actual engine, rather than reusing every setting from another Corvette trim.

What to monitor on this engine

Coolant temperature and RPM are practical first readings for this engine. Oil temperature and pressure are useful additions for warm-up and sustained engine load; a wired sensor provides a separate measurement route. Engine RPM and coolant readings describe the combustion engine; they are separate from traction-battery measurements. An automatic-transmission temperature reading belongs to the automatic gearbox; it should not be labeled as a manual-gearbox reading.

Installation approach

Aim a compact mount from the low driving position, keeping both the factory instrument display and outward view clear. Fit the mount from your normal seating position before fixing it in place.

Connect the OBD-II adapter at the vehicle diagnostic connector and secure its cable along fixed trim. Leave the connector accessible for servicing. Follow the Flock user manual for gauge power, adapter setup and wired-sensor connections.

OBD-II and wired readings

Choose standard OBD-II readings such as coolant temperature, RPM, intake-air temperature and vehicle speed in the gauge menu. Use wired sensors when you want an independent oil-temperature, oil-pressure or boost measurement.

Configure your gauge

The gauge displays whole-number OBD readings. For temperature definitions labeled C, use the gauge’s temperature preference to choose Celsius or Fahrenheit.

Browse all gauge setup guides

Sources

Get your Flock Gauge

Choose the Flock 52mm Gauge with the OBD-II option for this setup.

Shop the Flock Gauge with OBD-II