2015–2019 Chevrolet Corvette Stingray 6.2L V8 LT1 Gauge Setup
Flock 52mm Gauge
One gauge for OBD-II data and wired sensors. Choose your setup below.
_Stingray_(16133756070).jpg){kind=link}
This C7 Stingray page focuses on the naturally aspirated LT1. Z06 and ZR1 engines need separate pages, and the mid-engine C8 should not share this fitment entry.
Use one Flock 52mm Gauge with the OBD-II setup available on the Flock gauge product page. The readings returned by your vehicle determine which display options you can use.
What to monitor on this engine
For track sessions, put coolant temperature, oil temperature and oil pressure together. Keep calculated oil temperature labeled as calculated, and choose transmission readings for the Stingray’s manual or automatic gearbox.
Installation approach
Use a reversible 52mm mount first to check the low seating position and forward view. Confirm adapter clearance at the diagnostic connector and retain access for vehicle servicing.
Start with standard OBD-II readings such as coolant temperature or RPM, then add custom manufacturer-specific PIDs in the gauge settings. You can also connect wired sensors to display additional measurements.
Custom PID settings
The following OBDb custom PID definitions are compatible with the current Flock firmware. Enter the request, CAN header, formula and unit shown below in the gauge’s custom-PID settings.
Engine oil pressure
- Request:
222345 - CAN header:
7E0 - Formula:
A*4 - Unit: kPa
Transmission fluid temperature, variant 1
- Request:
221940 - CAN header:
7E0 - Formula:
A-40 - Unit: C
Calculated engine oil temperature
- Request:
221154 - CAN header:
7E0 - Formula:
A-40 - Unit: C
Configure your gauge
Use the Flock user manual for setup and custom-PID configuration. The gauge displays whole-number OBD readings.
Choose your Flock gauge setup · Browse gauge setup guides
Research sources
- Vehicle specification or owner document 1
- Vehicle specification or owner document 2
- OBDb Chevrolet-Corvette
Signal definitions are adapted from OBDb contributors under CC BY-SA 4.0. Adaptations include Flock-compatible formulas and unit labels. License.
Get your Flock Gauge
Choose the Flock 52mm Gauge with the OBD-II option for this setup.