2020–2024 Ford Explorer 2.3L Turbo 4-Cylinder Gauge Setup

Flock 52mm Gauge

Flock 52mm Gauge

One gauge for OBD-II data and wired sensors. Choose your setup below.

View gauge details

Representative Ford Explorer exterior
Representative vehicle photo. Photo: Marcozizi · CC BY-SA 4.0. Image unchanged.

This setup covers the US-market 2020–2024 Ford Explorer with the 2.3L Turbo 4-Cylinder engine. Use one Flock 52mm Gauge for your selected OBD-II readings and wired-sensor measurements.

Choose the correct powertrain

Model years
2020–2024
Engine
2.3L Turbo 4-Cylinder
Listed transmission choices
Automatic (S10), Automatic 10-spd
Listed drive configurations
Intelligent 4-Wheel Drive, Rear-Wheel Drive

An Explorer used for family trips or towing can benefit from a simple engine-cooling screen.

What to monitor on this engine

Coolant temperature and RPM are practical first readings for this engine. Add intake-air temperature for a view of intake heat under repeated load. If you display pressure, keep absolute manifold pressure distinct from boost relative to atmosphere. An automatic-transmission temperature reading belongs to the automatic gearbox; it should not be labeled as a manual-gearbox reading.

Installation approach

Mount near the driver rather than behind the center display and leave the vehicle’s drive-mode and climate controls accessible. Fit the mount from your normal seating position before fixing it in place.

Connect the OBD-II adapter at the vehicle diagnostic connector and secure its cable along fixed trim. Leave the connector accessible for servicing. Follow the Flock user manual for gauge power, adapter setup and wired-sensor connections.

OBD-II and wired readings

Choose standard OBD-II readings such as coolant temperature, RPM, intake-air temperature and vehicle speed in the gauge menu. Use wired sensors when you want an independent oil-temperature, oil-pressure or boost measurement.

Configure your gauge

The gauge displays whole-number OBD readings. For temperature definitions labeled C, use the gauge’s temperature preference to choose Celsius or Fahrenheit.

Browse all gauge setup guides

Sources

Get your Flock Gauge

Choose the Flock 52mm Gauge with the OBD-II option for this setup.

Shop the Flock Gauge with OBD-II