2022–2024 Ford Maverick 2.0L EcoBoost I4 Gauge Setup

Flock 52mm Gauge

Flock 52mm Gauge

One gauge for OBD-II data and wired sensors. Choose your setup below.

View gauge details

Representative Ford Maverick exterior
Representative vehicle photo. Photo: Greg Gjerdingen from Willmar, USA · CC BY 2.0. Image unchanged.

This guide covers the 2.0L EcoBoost Maverick. The 2.5L hybrid uses a different powertrain, so its installation and enhanced readings should be reviewed on a separate page.

Use one Flock 52mm Gauge with the OBD-II setup available on the Flock gauge product page. The readings returned by your vehicle determine which display options you can use.

What to monitor on this engine

For an EcoBoost Maverick used for light towing, put coolant temperature first. Add intake-air temperature for the turbo engine and transmission-fluid temperature for loaded trips.

Installation approach

Use a removable 52mm mount while checking the compact cabin’s sight lines. Route the OBD adapter connection away from the footwell and check that the connection stays stable after an engine restart.

Start with standard OBD-II readings such as coolant temperature or RPM, then add custom manufacturer-specific PIDs in the gauge settings. You can also connect wired sensors to display additional measurements.

Custom PID settings

The following OBDb custom PID definitions are compatible with the current Flock firmware. Enter the request, CAN header, formula and unit shown below in the gauge’s custom-PID settings.

Engine oil temperature
  • Request: 221310
  • CAN header: 7E0
  • Formula: (A*256+B)/100-40
  • Unit: C
Oil pressure
  • Request: 220415
  • CAN header: 7E0
  • Formula: (A-256*floor(A/128))*256+B
  • Unit: kPa
Transmission fluid temperature, variant 1
  • Request: 221674
  • CAN header: 7E0
  • Formula: (A*256+B)/8
  • Unit: F

Configure your gauge

Use the Flock user manual for setup and custom-PID configuration. The gauge displays whole-number OBD readings.

Choose your Flock gauge setup · Browse gauge setup guides

Research sources

Signal definitions are adapted from OBDb contributors under CC BY-SA 4.0. Adaptations include Flock-compatible formulas and unit labels. License.

Get your Flock Gauge

Choose the Flock 52mm Gauge with the OBD-II option for this setup.

Shop the Flock Gauge with OBD-II