2019–2021 Hyundai Veloster 2.0L Naturally Aspirated 4-Cylinder Gauge Setup

Flock 52mm Gauge

Flock 52mm Gauge

One gauge for OBD-II data and wired sensors. Choose your setup below.

View gauge details

Representative Hyundai Veloster exterior
Representative vehicle photo. Photo: Kevauto · CC BY-SA 4.0. Image unchanged.

This setup covers the US-market 2019–2021 Hyundai Veloster with the 2.0L Naturally Aspirated 4-Cylinder engine. Use one Flock 52mm Gauge for your selected OBD-II readings and wired-sensor measurements.

Choose the correct powertrain

Model years
2019–2021
Engine
2.0L Naturally Aspirated 4-Cylinder
Listed transmission choices
Automatic (S6), Manual 6-spd
Listed drive configurations
Front-Wheel Drive

This is the 147-hp naturally aspirated Veloster 2.0. The turbocharged 2.0L Veloster N has a separate setup.

A Veloster setup should match the naturally aspirated or turbocharged powertrain before choosing readings.

What to monitor on this engine

Coolant temperature and RPM are practical first readings for this engine. Oil temperature and pressure are useful additions for warm-up and sustained engine load; a wired sensor provides a separate measurement route. An automatic-transmission temperature reading belongs to the automatic gearbox; it should not be labeled as a manual-gearbox reading.

Installation approach

Keep the display close to the driver and preserve the factory screen, shifter and console storage. Fit the mount from your normal seating position before fixing it in place.

Connect the OBD-II adapter at the vehicle diagnostic connector and secure its cable along fixed trim. Leave the connector accessible for servicing. Follow the Flock user manual for gauge power, adapter setup and wired-sensor connections.

OBD-II and wired readings

Choose standard OBD-II readings such as coolant temperature, RPM, intake-air temperature and vehicle speed in the gauge menu. Use wired sensors when you want an independent oil-temperature, oil-pressure or boost measurement.

Configure your gauge

The gauge displays whole-number OBD readings. For temperature definitions labeled C, use the gauge’s temperature preference to choose Celsius or Fahrenheit.

Browse all gauge setup guides

Sources

Get your Flock Gauge

Choose the Flock 52mm Gauge with the OBD-II option for this setup.

Shop the Flock Gauge with OBD-II