2006–2010 Pontiac Solstice 2.4L 4-Cylinder Gauge Setup
Flock 52mm Gauge
One gauge for OBD-II data and wired sensors. Choose your setup below.
This setup covers the US-market 2006–2010 Pontiac Solstice with the 2.4L 4-Cylinder engine. Use one Flock 52mm Gauge for your selected OBD-II readings and wired-sensor measurements.
Choose the correct powertrain
- Model years
- 2006–2010
- Engine
- 2.4L 4-Cylinder
- Listed transmission choices
- Automatic 5-spd, Manual 5-spd
- Listed drive configurations
- Rear-Wheel Drive
A Solstice display should stay compact and distinguish the turbocharged engine from the naturally aspirated setup.
What to monitor on this engine
Coolant temperature and RPM are practical first readings for this engine. Oil temperature and pressure are useful additions for warm-up and sustained engine load; a wired sensor provides a separate measurement route. An automatic-transmission temperature reading belongs to the automatic gearbox; it should not be labeled as a manual-gearbox reading.
Installation approach
Keep the gauge within the driver’s view and route its cable away from the shifter and convertible roof movement. Fit the mount from your normal seating position before fixing it in place.
Connect the OBD-II adapter at the vehicle diagnostic connector and secure its cable along fixed trim. Leave the connector accessible for servicing. Follow the Flock user manual for gauge power, adapter setup and wired-sensor connections.
OBD-II and wired readings
Choose standard OBD-II readings such as coolant temperature, RPM, intake-air temperature and vehicle speed in the gauge menu. Use wired sensors when you want an independent oil-temperature, oil-pressure or boost measurement.
Configure your gauge
The gauge displays whole-number OBD readings. For temperature definitions labeled C, use the gauge’s temperature preference to choose Celsius or Fahrenheit.
Sources
- EPA/DOE 2006 vehicle specification
- EPA/DOE 2007 vehicle specification
- EPA/DOE 2008 vehicle specification
- EPA/DOE 2009 vehicle specification
- EPA/DOE 2010 vehicle specification
Get your Flock Gauge
Choose the Flock 52mm Gauge with the OBD-II option for this setup.