2020–2023 Ram 1500 3.6L 6-Cylinder Hybrid Gauge Setup

Flock 52mm Gauge

Flock 52mm Gauge

One gauge for OBD-II data and wired sensors. Choose your setup below.

View gauge details

Representative Ram 1500 exterior
Representative vehicle photo. Photo: Bull-Doser · Public domain. Image unchanged.

This setup covers the US-market 2020–2023 Ram 1500 with the 3.6L 6-Cylinder Hybrid engine. Use one Flock 52mm Gauge for your selected OBD-II readings and wired-sensor measurements.

Choose the correct powertrain

Model years
2020–2023
Engine
3.6L 6-Cylinder Hybrid
Listed transmission choices
Automatic 8-spd
Listed drive configurations
4-Wheel Drive, Rear-Wheel Drive

Set up a Ram 1500 for the way it is loaded: coolant for everyday use, with oil and automatic-transmission temperature as useful additional readings.

What to monitor on this engine

Coolant temperature and RPM are practical first readings for this engine. Oil temperature and pressure are useful additions for warm-up and sustained engine load; a wired sensor provides a separate measurement route. Engine RPM and coolant readings describe the combustion engine; they are separate from traction-battery measurements. An automatic-transmission temperature reading belongs to the automatic gearbox; it should not be labeled as a manual-gearbox reading.

Installation approach

Keep the gauge clear of trailer-brake controls and route the cable where entry and exit cannot catch it. Fit the mount from your normal seating position before fixing it in place.

Connect the OBD-II adapter at the vehicle diagnostic connector and secure its cable along fixed trim. Leave the connector accessible for servicing. Follow the Flock user manual for gauge power, adapter setup and wired-sensor connections.

Custom PID settings

These OBDb definitions fit the current Flock firmware. Enter the request, CAN header, formula and unit shown below in the gauge’s custom-PID settings.

Variable valve timing oil pressure
  • Request: 22069E
  • CAN header: 7E0
  • Formula: A*4
  • Unit: kPa

OBDb source definition

Variable valve timing oil temperature
  • Request: 22069F
  • CAN header: 7E0
  • Formula: A-64
  • Unit: C

OBDb source definition

Transmission fluid temperature
  • Request: 225043
  • CAN header: 7E1
  • Formula: A-40
  • Unit: C

OBDb source definition

Configure your gauge

The gauge displays whole-number OBD readings. For temperature definitions labeled C, use the gauge’s temperature preference to choose Celsius or Fahrenheit.

Browse all gauge setup guides

Sources

Signal definitions are adapted from OBDb contributors under CC BY-SA 4.0. Adaptations include Flock-compatible formulas and unit labels.

Get your Flock Gauge

Choose the Flock 52mm Gauge with the OBD-II option for this setup.

Shop the Flock Gauge with OBD-II