2006 Ram 1500 SRT-10 8.3L 10-Cylinder Gauge Setup
Flock 52mm Gauge
One gauge for OBD-II data and wired sensors. Choose your setup below.
This setup covers the US-market 2006 Ram 1500 SRT-10 with the 8.3L 10-Cylinder engine. Use one Flock 52mm Gauge for your selected OBD-II readings and wired-sensor measurements.
Choose the correct powertrain
- Model years
- 2006
- Engine
- 8.3L 10-Cylinder
- Listed transmission choices
- Automatic 4-spd, Manual 6-spd
- Listed drive configurations
- Rear-Wheel Drive
Set up a Ram 1500 SRT-10 for the way it is loaded: coolant for everyday use, with oil and automatic-transmission temperature as useful additional readings.
What to monitor on this engine
Coolant temperature and RPM are practical first readings for this engine. Oil temperature and pressure are useful additions for warm-up and sustained engine load; a wired sensor provides a separate measurement route. An automatic-transmission temperature reading belongs to the automatic gearbox; it should not be labeled as a manual-gearbox reading.
Installation approach
Keep the gauge clear of trailer-brake controls and route the cable where entry and exit cannot catch it. Fit the mount from your normal seating position before fixing it in place.
Connect the OBD-II adapter at the vehicle diagnostic connector and secure its cable along fixed trim. Leave the connector accessible for servicing. Follow the Flock user manual for gauge power, adapter setup and wired-sensor connections.
OBD-II and wired readings
Choose standard OBD-II readings such as coolant temperature, RPM, intake-air temperature and vehicle speed in the gauge menu. Use wired sensors when you want an independent oil-temperature, oil-pressure or boost measurement.
Configure your gauge
The gauge displays whole-number OBD readings. For temperature definitions labeled C, use the gauge’s temperature preference to choose Celsius or Fahrenheit.
Sources
Get your Flock Gauge
Choose the Flock 52mm Gauge with the OBD-II option for this setup.