2019 Ram 2500 6.7L Cummins Turbo I6 Diesel Gauge Setup
Flock 52mm Gauge
One gauge for OBD-II data and wired sensors. Choose your setup below.
This setup covers the US-market 2019 Ram 2500 with the 6.7L Cummins Turbo I6 Diesel engine. Use one Flock 52mm Gauge for your selected OBD-II readings and wired-sensor measurements.
Choose the correct powertrain
- Model years
- 2019
- Engine
- 6.7L Cummins Turbo I6 Diesel
A separate model-year entry keeps the later Cummins revision apart from earlier trucks.
For a Ram 2500 hauling or towing, put sustained engine heat and oil monitoring ahead of extra decorative readings.
What to monitor on this engine
Coolant temperature and RPM are practical first readings for this engine. Add intake-air temperature for a view of intake heat under repeated load. If you display pressure, keep absolute manifold pressure distinct from boost relative to atmosphere.
Installation approach
Keep the diagnostic connection accessible for service and preserve the driver’s reach to the trailer-brake controls. Fit the mount from your normal seating position before fixing it in place.
Connect the OBD-II adapter at the vehicle diagnostic connector and secure its cable along fixed trim. Leave the connector accessible for servicing. Follow the Flock user manual for gauge power, adapter setup and wired-sensor connections.
Custom PID settings
These OBDb definitions fit the current Flock firmware. Enter the request, CAN header, formula and unit shown below in the gauge’s custom-PID settings.
Variable valve timing oil pressure
- Request:
22069E - CAN header:
7E0 - Formula:
A*4 - Unit: kPa
Variable valve timing oil temperature
- Request:
22069F - CAN header:
7E0 - Formula:
A-64 - Unit: C
Transmission temperature
- Request:
2204FE - CAN header:
7E1 - Formula:
A*9/5-40 - Unit: F
Transmission fluid temperature v.2
- Request:
2118 - CAN header:
7E0 - Formula:
(A*256+B)/64 - Unit: F
Configure your gauge
The gauge displays whole-number OBD readings. For temperature definitions labeled C, use the gauge’s temperature preference to choose Celsius or Fahrenheit.
Sources
Signal definitions are adapted from OBDb contributors under CC BY-SA 4.0. Adaptations include Flock-compatible formulas and unit labels.
Get your Flock Gauge
Choose the Flock 52mm Gauge with the OBD-II option for this setup.